Radiant Heat

http://rogeehydronics.com/index.phpRGP Modules

PS-199 Primary and secondary hydronic module with (1) Grundfos 2699 pump primary loop and (1) Grundfos 1558 pump secondary loop.	PSD-199 Primary loop w/Grundfos 2699/Secondary loop w/Grundfos 1558, domestic loop w/1558. 1" piping with make up

RGP Industries builds custom heating modules for Radiant Heat Systems. We will build to your specifications or designs that we have already in stock. Please contact us at 818-707-2666 for a distributor in your area.
These modules work well with any boiler or other heating source.

PSM-4-1 Primary and secondary (4) zone actuated manifold hydronic module with (1) Grundfos 2699 pump Primary loop and (1) Grundfos 1558 pump secondary loop. Also includes Taco ZVC 404 control.	PS-158 Primary and secondary hydronic module with (1) Grundfos 1558 pump primary loop and (1) Grundfos 1558 pump secondary loop. Also includes Taco 501 relay control.

PSM5-199 Primary loop w/Grundfos 2699/Secondary loop w/Grundfos 1558, Legend 4-port manifold w/actuators 1" piping, Taco ZVC-406 control and make up

P-1 Module. Primary 1" loop with (1) 1" branch zone. (2) 1” isolation valves and (2) drain valves and make up. This module works well for boilers or heat sources with on board pumps, this module provides a balanced primary loop with simple connections to the heat source and the heating load. Connect domestic water supply to the 1/2" make-up line to fill the closed loop system.

DHX-1-2Z The components include a Taco X-Pump block heat exchanger which includes dual Taco 008 circulators and out-door reset for optimal efficiency.
The heat exchanger is for domestic and heating hot water separation, a Grundfos UPS15-55SFC stainless steel 3 spd. circulator for the primary loop. (2) Legend LZV-2 2-way 1" motorized zone valves for each radiant manifold. (1) Taco ZVC-403 control, and all the basic make-up line components with the exception of the expansion tank. This piping is done in 1" Type "L" copper and shall reduce to 3/4" @ the heat exchanger connections.

PSD-199-258, Primary loop w/Grundfos 2699/Secondary loop with (2) Grundfos 1558s with a split pipe return, domestic loop w/Grundfos 1558. Primary loop 11/4" piping with 1” piping on secondary and domestic loops and make up Taco SR502 control.

PS358-199 Primary 11/4"" loop w/Grundfos 2699, (3) Secondary 1" branch zones each w/Grundfos 1558s. Taco SR503 control and make up

HX50-75 The components include a Stainless Steel 5” x 12” Brazed Plate Heat Exchanger 50K BTU/H. (1) Taco OOR 3 spd. circulator on the secondary heating loop and (1) Taco OO8 stainless steel circulator on the domestic loop. The heat exchanger is for domestic and heating hot water separation. Includes all the basic make-up line components. This piping is done in 3/4" Type "L" copper for the same connections on the heat exchanger.

Rogee Hydronics
PO Box 6111 Malibu, CA 90264
Phone: (818) 707-2666
Fax: (818) 707-2880
Email: ron@rogeehydronics.com or prema@rogeehydronics.com